JDV Equipment Corporation
About
JDV Equipment Corporation is a New Jersey-based manufacturer that has designed and built process equipment for water, wastewater, industrial, and agricultural applications for over 50 years, with installations spanning all 50 US states and international markets. The company's three product divisions cover solids handling, anaerobic digestion, and water treatment. Solids handling equipment includes shaftless and shafted screw conveyors, belt conveyors, the RAM Compactor for screenings washing, the Spiral Press for combined dewatering and compacting, Step Screens and In-Channel Screw Screens with pre-MBR openings to 0.5mm, Rotary Drum Screens in internal and external feed configurations, plus grit classifiers and submerged grit conveyors. The anaerobic digestion line features the Turbomixer large-bubble mixing system, CFD-validated nozzle mixing systems, tube-in-tube sludge heat exchangers, and fixed, floating, and gas storage digester covers including dual-membrane gas holders. The water treatment division offers the Walking Beam Flocculator, a slow-moving reciprocating paddle design with fiberglass-reinforced plastic blades. JDV acquired Ralph B. Carter Corporation in 1995, adding decades of additional design heritage. The company provides engineering support from project inception through commissioning.
Key Products
Stainless steel trough conveyors with special alloy steel shaftless spirals for transporting screened grit, sludge, and solids in wastewater treatment plants.
Screw conveyors with live bottom hopper mixing and transport capabilities for handling wastewater solids and screenings.
Conveyors handling municipal sludge, screened material, and industrial materials, meeting CEMA standards.
304 stainless steel screenings compactor that removes approximately 30% of organic/fecal matter from bar screenings, helping plants meet landfill and paint filter test requirements.
Combined dewatering, compacting, and conveying system that drains free water at the feed end and compresses solids into a plug against a spring-loaded door, suitable for wastewater screenings, paper mills, and food processing.
Self-leveling container cover system for standard 20-30-40 yard containers that contains odors while leveling materials, reducing operator contact and lowering total cost of ownership.
Stainless steel sludge thickeners producing 5-7% TS with throughput from 35 to 400 gpm, based on the Ralph B. Carter design.
Stainless steel step screens with openings from 0.5mm to 6mm, available with pre-MBR options, for headworks screening in wastewater treatment.
Stainless steel in-channel screw screens for wastewater headworks screening with integrated washing and compaction.
Stainless steel rotary drum fine screens for wastewater screening applications with direct and chain-driven designs.
Stainless steel grit classification equipment in shaftless or shafted screw designs handling flows up to 800 gpm.
Submerged grit conveyors in shafted and shaftless designs with direct, chain, or hydraulic drive options for grit transport in treatment plants.
Large anaerobic bubble mixer fabricated from stainless steel that keeps digesters well mixed bottom-to-top, reducing volatile suspended solids and increasing gas production, with optional in-digester heating.
Stainless steel or ductile iron nozzle mixing systems with abrasive liner protection and CFD modeling, applicable to blending tanks, septage/leachate, anoxic zones, CSO handling, aerobic digestion, and biosolids holding.
Direct sludge heating exchangers that eliminate heat short-circuiting, pairable with cast iron boiler systems for higher efficiency.
Dual deck truss digester covers in fixed, floating, and gas storage configurations with attic insulation, available in radial beam designs.
Rigid reinforced membrane gas storage systems on standalone concrete pads for digester gas, resistant to H2S, suitable for heating equipment, clean gas reuse, and plant cogeneration.
Economical gas storage covers holding more gas than traditional steel covers without adding plant footprint, with 4-16+ inches w.c. pressure range.
Slow-moving reciprocating paddle flocculators with fiberglass-reinforced plastic paddles and stainless steel components that improve sedimentation and filterability of small particles, proven design for over 50 years.
Service Area
Western US
Is this your company?
Claim this listing to update your information and feature your products.
Do you know where your next client is? We do.
Violations, consent orders, full historical DMR data, plant details and rankings for every regulated facility — searchable with a smart AI interface.
